+subby1 Posted December 18, 2010 Report Share Posted December 18, 2010 Tiller season is going to be here before you know it, so check those things out, and make sure you're ready to go. If there not, then give me a call and we'll set up a time for you to bring it by for a tune-up or repair work. Lawn mowers, gas generators, pressure washers, etc. All 4-stroke engines welcome!! All work is done quickly with very little waiting time, unbeatable labor rates, quality-assured with a 30 day warranty on labor costs and some parts**. Save yourself some money without sacrificing the quality of repair work, or waiting for long extended periods of time to get your equipment back in perfect running condition!! Business is back open FULL TIME until further notice. Shop hours are: Mon-Fri from 11:00 a.m. until 8:00 p.m. Saturday and Sunday from 12 noon until 5:00 p.m. Call Glenn 678-315-8794 and set up a time to drop your equipment off. I look forward to serving you again in 2011. Link to post Share on other sites
Joejetzu Posted December 18, 2010 Report Share Posted December 18, 2010 I still have two dead push mowers and a dead riding mower I need to get to you. I will get them over there before the Spring. I could fix them, but I am just too dang lazy. LOL Link to post Share on other sites
+subby1 Posted December 18, 2010 Author Report Share Posted December 18, 2010 I still have two dead push mowers and a dead riding mower I need to get to you. I will get them over there before the Spring. I could fix them, but I am just too dang lazy. LOL I would be happy to handle it for ya! I was gonna say in the initial post, that it would do people well to not wait until the last moment to get their mowers ready for Spring. Because (usually) around the end of February, all heck breaks loose and I get flooded for business. Incidentally, I also spent much of my off-season re-organizing the shop and making a few changes to make things flow better this coming year. I'm really excited about it!! Link to post Share on other sites
Joejetzu Posted December 18, 2010 Report Share Posted December 18, 2010 I would be happy to handle it for ya! I was gonna say in the initial post, that it would do people well to not wait until the last moment to get their mowers ready for Spring. Because (usually) around the end of February, all heck breaks loose and I get flooded for business. Incidentally, I also spent much of my off-season re-organizing the shop and making a few changes to make things flow better this coming year. I'm really excited about it!! One push mower just needs the pull assembly replaced, one I know needs a cable, but I am not sure what else, and as I told you at the end of the season, my riding mower may have blown, but I haven't even checked. It just stalled suddenly last time I cut grass and I pushed it into the shop and left it, but I need to get something going before Spring. Don't want to wait to the last minute. Link to post Share on other sites
+subby1 Posted December 18, 2010 Author Report Share Posted December 18, 2010 One push mower just needs the pull assembly replaced, one I know needs a cable, but I am not sure what else, and as I told you at the end of the season, my riding mower may have blown, but I haven't even checked. It just stalled suddenly last time I cut grass and I pushed it into the shop and left it, but I need to get something going before Spring. Don't want to wait to the last minute. Well, I'm your man! Link to post Share on other sites
Mariposa Posted December 18, 2010 Report Share Posted December 18, 2010 Strange question... but can you sharpen a machete? I have one that has never been sharpened, but someone suggested that I try a lawnmower repair place since they sharpen blades. What do you think? Link to post Share on other sites
+subby1 Posted December 18, 2010 Author Report Share Posted December 18, 2010 Strange question... but can you sharpen a machete? I have one that has never been sharpened, but someone suggested that I try a lawnmower repair place since they sharpen blades. What do you think? I can sharpen just about anything. I could do it quick on the grindstone, or slow and by hand with a file. Depends on what kind of shape the machete is in. Once someone has used a grindstone and heated the blade, you're pretty much stuck with using that method from then on. But sure...I can!! Link to post Share on other sites
Mariposa Posted December 18, 2010 Report Share Posted December 18, 2010 I can sharpen just about anything. I could do it quick on the grindstone, or slow and by hand with a file. Depends on what kind of shape the machete is in. Once someone has used a grindstone and heated the blade, you're pretty much stuck with using that method from then on. But sure...I can!! I bought it new and the blade has never been sharpened. Please pm the approximate cost and where/when I could bring it. I'm off this week so I'm flexible as to times. Link to post Share on other sites
+subby1 Posted January 6, 2011 Author Report Share Posted January 6, 2011 Bumped to let everyone know that I will be going full time until further notice. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now