+subby1 Posted July 13, 2009 Report Share Posted July 13, 2009 Thank goodness we're finally getting some rain back in. Hopefully, this will help business pick back up. I have a few rebuilds to work on, but I'll drop whatever I'm rebuilding to get you fixed up if your mower is giving you trouble. You won't get a better deal anywhere else, folks~~~ Times are tough, and while I need to make some money, you need to SAVE some money, so bring your busted mowers to me, and we can help each other out. You'll receive top-quality work for a truly low price (much less than you'd pay elsewhere) and I take each and every job personal, so that I know you will be satisfied, and even surprised by the results and the price. Keep in mind that I also repair engines on pressure washers, generators, and basically anything with a small gasoline engine running it. I appreciate your business more than you know! Glenn (a.k.a. Subby) 678-315-8794 Link to post Share on other sites
MrsB Posted July 13, 2009 Report Share Posted July 13, 2009 Do you do push mowers, too? (I am assuuming yes, but wanted to make sure) I think we may need to have ours repaired or at least looked at. Link to post Share on other sites
+subby1 Posted July 13, 2009 Author Report Share Posted July 13, 2009 Do you do push mowers, too? (I am assuuming yes, but wanted to make sure) I think we may need to have ours repaired or at least looked at. I SPECIALIZE in push mowers. I prefer them over riders, actually. I don't have a lot of space to work in, and I don't like breaking my back working on the huge mowers, but I still have to deal with it to get enough business. I would LOVE to check your mower out! And like I said, you'll only be paying about 2/3 of what a shop charges and get twice as much for your money......trust me! Link to post Share on other sites
+subby1 Posted July 14, 2009 Author Report Share Posted July 14, 2009 Good Tuesday morning!! Link to post Share on other sites
MrsB Posted July 14, 2009 Report Share Posted July 14, 2009 I SPECIALIZE in push mowers. I prefer them over riders, actually. I don't have a lot of space to work in, and I don't like breaking my back working on the huge mowers, but I still have to deal with it to get enough business. I would LOVE to check your mower out! And like I said, you'll only be paying about 2/3 of what a shop charges and get twice as much for your money......trust me! Great! Thanks. I will let the husband know. It was acting up this past weekend when he went to cut the grass. Link to post Share on other sites
+subby1 Posted July 14, 2009 Author Report Share Posted July 14, 2009 Great! Thanks. I will let the husband know. It was acting up this past weekend when he went to cut the grass. Terrific. I sent you a PM with my location. Link to post Share on other sites
+subby1 Posted July 14, 2009 Author Report Share Posted July 14, 2009 Tuesday evening bump, for your convenience. Link to post Share on other sites
+subby1 Posted July 17, 2009 Author Report Share Posted July 17, 2009 Bumping for the weekend~~~ Link to post Share on other sites
ajax Posted July 18, 2009 Report Share Posted July 18, 2009 Bumping for the weekend~~~ Hey Subby....I dont have anything major to fix, but i was wondering if you would fix this problem. I have a older toro weed machine...the type you put attachments on. well the peice that you tighten on the engine side of the shaft is stripped. this means the attachment cant be tightened. this machine starts right up every time. i really hate to buy a new one. this doesnt seem like a huge repair for me to bring to a shop. if it going to cost alot, it might be time for me to buy a new one. do you do these type of repairs, if so can you give me a ballpark price to fix. Link to post Share on other sites
+subby1 Posted July 22, 2009 Author Report Share Posted July 22, 2009 Hey Subby....I dont have anything major to fix, but i was wondering if you would fix this problem. I have a older toro weed machine...the type you put attachments on. well the peice that you tighten on the engine side of the shaft is stripped. this means the attachment cant be tightened. this machine starts right up every time. i really hate to buy a new one. this doesnt seem like a huge repair for me to bring to a shop. if it going to cost alot, it might be time for me to buy a new one. do you do these type of repairs, if so can you give me a ballpark price to fix. It wouldn't cost you much at all......just bring it to me. You will be HAPPY with the price, I assure you. Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now