+subby1 Posted September 26, 2009 Report Share Posted September 26, 2009 Just wanted to let you know that I'm still taking in all the bizz I can get. It's amazing what some foam rubber and duct tape can do to keep a feller going on a broken toe! I've got more work done today, in spite of the rain and by busted up toe than I thought I would be able to. So, just keep them coming, and I'll keep on fixing them and continue to give you the best prices in town!! Thanks Folks~~~ Glenn 678-315-8794 Link to post Share on other sites
chindog Posted September 26, 2009 Report Share Posted September 26, 2009 Subby, do you work on DR trimmers? Mine has been sitting in the garage for a few years, and I dug it out the other day, but haven't tried to crank it up yet. It has a 5.0 Briggs and Stratton engine. It probably needs a tune up even if it does still run. Link to post Share on other sites
+subby1 Posted September 26, 2009 Author Report Share Posted September 26, 2009 Subby, do you work on DR trimmers? Mine has been sitting in the garage for a few years, and I dug it out the other day, but haven't tried to crank it up yet. It has a 5.0 Briggs and Stratton engine. It probably needs a tune up even if it does still run. I sure enough do....but if it's been sitting for a few YEARS, it will most likely need a carb kit installed (full rebuild), and we have to hope that too much corrosion didn't get into the carb. Other than that, shouldn't be a problem. Something like that would run you about $80-100, which aint too bad, when you consider that a NEW carburetor would run you that much or more, not counting the labor. That service also includes inspecting and/or replacing fuel lines, oil change, cleaning the air filter (or replacing, if necessary), etc. You pretty much want to have the whole machine gone through if it's been sitting a long time. And I'm pretty sure aint nobody else around going to give you all that service for less than 150 or more. Drop me a line if you wanna drop it off. I'd be happy to take care of you. Glenn Link to post Share on other sites
chindog Posted September 26, 2009 Report Share Posted September 26, 2009 If you're open on Monday, I'll bring it by. Link to post Share on other sites
+subby1 Posted September 26, 2009 Author Report Share Posted September 26, 2009 If you're open on Monday, I'll bring it by. I will be opened up for business on Monday at 11:00 a.m. Just call me before you head over... 341 RIDGE RUN DRIVE HIRAM, GA 30141 Link to post Share on other sites
+subby1 Posted September 29, 2009 Author Report Share Posted September 29, 2009 Good Morning, everyone! My turn-around time is up to one week for the first time this year, so hurry up if you need some repair work done, so I can get you in before the wait gets any longer. Suggestion------this is a great time you those of you who have gasoline generators to try to fire them up, and make sure you're set for the cold weather ahead. If they're dead or sputtering, bring them on down. I'd be happy to fix you up and make sure those baby's will get you through the Winter with no hassles!! Thanks~~~ Glenn 678-315-8794 Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now